Pumps Plus

Pumps Plus Celebrates 20 years of service to the Water and Waste Water Market

Since 1988 Pumps Plus Inc. has provided quality products to the Water and Wastewater industry.

The company has grown to a staff of three. Matt, Susan and Jack thank you for your support over the years and look forward to continuing to serve the industry.

Diadisk Pumps in Service for Over 5 Years at City of Trenton

Two 4" Diadisk "dual disc" pumps were started up in November of 2003 and have operated troublefree since then while pumping 2-3% primary sludge. Each pump is rated for 40-150 gpm @ 18'-30" tdh and are equipped with VFD's. These pumps replaced piston pumps.

The owner is very pleased with the performance of these pumps. The pumps have no check valves, mechanical seals, packing or flush water. All advantages over the pumps they replaced. The pumps can run dry in addition to passing rags and other soft solids with ease.

Morris CT 3x3-16 operating on grit at Holland WWTP since 2004

The City of Holland was looking to replace a Wemco pump and came to us. The high chrome iron used in the Morris pump is superior to the Ni-hard of the old pump. Ni-hard is "as cast" and cannot be machined whereas the high chrome iron can without any sacrifice in hardness. The pump is rated for 50-120 gpm. The owner was able to use the existing base and motor. We provided new belts and sheaves to achieve the performance.

Spaans Babcock 72" screw pumps installed at Ann Arbor WWTP

The City of Ann Arbor installed two new Spaans Babcock screw pumps at their facility. There are a total of five pumps at the plant. The project also involved the replacement of the gear reducers, motors and ,lube system pumps for all five pumps. The units were put in operation in August of 2007